Before using for the first time
27
The steam ironing system is now
ready for use
This completes the settings for using
the appliance for the first time. The
message Initial set-up complete will ap-
pear in the display. Confirm this mes-
sage by pressing the OK button.
The steam ironing system will normally
run a rinse programme automatically
after it has been set up for use.
The steam ironing system can then be
switched off or you can continue using
it.
When using the appliance for the first
time, a slight odour may be noticeable
during the heating-up phase. This will
dissipate with further use.
During operation of the steam ironing
system, pumping, boiling and knock-
ing noises may be heard. These are
normal noises and do not indicate a
malfunction.
To Next Page
Loading...
Need help?
General
