Miele PIB 100 User Manual

Steamer
39
The steamer is available as an access-
ory for the PIB100 commercial steam
ironing system.
The steamer makes smoothing
hanging garments such as dresses and
jackets easier. The removable brush at-
tachment raises the fabric’s pile.
The steamer is lighter than the iron. It
also does not have a hot soleplate and
therefore cannot create shiny spots
even if it comes into accidental contact
with the fabric.
The steamer can also be used when the
ironing board is folded up.
Connecting the Steamer
You can also plug the Steamer into the
steam connection of the steam ironing
system as an alternative to the iron.
Disconnecting the iron from the
steam connection
 Risk of burning or scalding due
to the hot soleplate.
The iron soleplate is still very hot
after use.
Avoid direct contact.
Place the iron on its resting surface
and let it cool down completely be-
fore you store it away.
Do not pull on the steam hose.
Always pull on the plug at the end of
the steam hose when disconnecting
it from the steam hose connection.
 Pull back the slider located on the
side of the steam hose plug.
 Hold the slider back.
 Withdraw the plug from the steam
connection.
Now you can connect the Steamer to
the steam connection.

Miele PIB 100 Specifications

General

Brand	Miele
Model	PIB 100
Category	Iron
Language	English