Assembly
*INSTALLATION*
18
Take the steam ironing system to its
installation site.
Use one hand to pull the release
mechanism upwards.
This releases the locking mechanism of
the ironing board and the X-frame folds
down.
Hold onto the release mechanism
and guide the ironing board into a po-
sition of approx. 45°.
The ironing board remains in this posi-
tion by itself.
Use both hands to pull the ironing
board upwards into a horizontal posi-
tion until it audibly clicks into place
on both sides of the tower.
Ensure the ironing board has locked
into place on both sides of the tower.
The height adjustment and the fan in
the ironing board only work if both sides
of the appliance have locked into place.
To Next Page
Loading...
Need help?
General
