Switching on
29
Filling the water container
If the water container is empty or not
installed in the tower, the message
Fill water cont. will appear in the dis-
play.
Removing the water container
Hold the water container by its
handle.
Pull the handle downwards.
The water container is released from the
retainer.
Pull the water container upwards and
out.
When removing, the water container
may drip a little while the valves of the
container close.
Tip: Dripping can be avoided by remov-
ing the water container slowly.
Filling the water container
Open the cover in the upper area of
the water container.
Fill the water container with fresh tap
water (water temperature approx. 15–
35°C).
Close the cover of the water con-
tainer.
Put the water container back into the
tower.
The water container can be removed
and refilled at any time (even during
the ironing process). The required
amount of water depends on how
much steam is used.
Steam operation