After washing
1 Turn the programme selector
to “Finish/Start”.
2 Press the “Door” button.
Only remove washing from the ma-
chine once the drum has stopped
turning, otherwise you may seri-
ously injure yourself.
3 Press the I-ON / O-OFF button.
4 Remove the washing.
Make sure the drum is empty. Items
left behind could shrink or colour
run in the next wash.
5
Check the folds in the door seal
for buttons etc.
6 Turn off the stop cock at the end
of the day
7 Close the drum door
Otherwise there is a danger of objects
being placed inadvertently in the drum.
If these remained unnoticed and were
washed in the next load, they could
damage the washing.
Brief guide to correct washing
13
To Next Page
Loading...
