Miele PT 7331 - Using the Tumble Dryer; Residual Moisture Setting

Residual moisture
of the items in 1 % steps from -4 to 40 %.
^
Turn the jog shuttle to "Residual moisture"
(0 %) and press to confirm the selection.
2 Hot Wash / Cottons dry 22.0 lb
0 % Drying 176°F
Cool down
m A
^
Turn the jog shuttle to the desired
percentage and press it to confirm the
selection.
^
Press the h "Start" button to begin the
program.
The program sequence is shown in the
display after the start of the program.
2 Hot Wash / Cottons dry
0 % Drying >40 %
Cool down Finish at 12:35
mKf
In the second display line, next to "Drying",
the actual residual moisture is shown
(>40%). The third line shows the following
program block.
The "Finish at 12:35" on the right side shows
the end time of the program.
The "Finish at" display has a self learn
function. Several program cycles are
necessary for an exact display.
Use
15