Need help?Do you have a question about the Miele PT 7136 and is the answer not in the manual?
General| Heating | Electric |
|---|---|
| Drying Technology | Heat pump |
| Height | 850 mm |
| Appliance Category | Commercial |
| Controls | Touch controls |
Covers essential reading, intended use, child safety, and general operation warnings.
Lists specific items and materials that must not be dried due to fire or damage risks.
Outlines critical safety measures for electrical connection, grounding, and plug usage.
Identifies and describes the main components of the dryer's control panel.
Explains the display's main menu, jog shuttle, and direct select buttons for program selection.
Guides through the initial welcome screen, language selection, and setting the time of day.
Provides guidance on interpreting fabric care symbols and tips for effective drying.
Instructions on how to sort laundry and load it correctly into the dryer drum.
Details how to select programs, set options like "Low temp."/"Timer", and start the drying cycle.
Explains remaining time, anti-crease function, and procedures at the end of a program.
Covers coin mechanisms, canceling programs, and adding/removing laundry during operation.
Details programs for Cotton (Extra dry, Normal, etc.) and Hand iron, including load sizes.
Describes programs for Woollen, Smoothing, Cool air, and Warm air, with usage notes.
Covers programs for Jeans, Shirts, Outerwear, Proofing, and Towelling, with load sizes and notes.
Explains how to select program end times, start the timer, and cancel it.
Guides on how to select and modify favorite drying programs.
Details the process of saving custom drying programs and assigning them to direct select buttons.
Step-by-step instructions for removing and disassembling the lint filter for cleaning.
Explains how to clean the lint filters (dry and wet) and the dryer's fan cavity.
Provides instructions on cleaning the appliance's exterior surfaces and control panel.
Addresses fault messages, load adjustments, program reminders, airway cleaning, and general program issues.
Covers condensation, static cling, lint buildup, power/display problems, and light bulb replacement.
Information on contacting Miele Technical Service and details about available optional accessories.
Covers fire risks, installer qualifications, packaging checks, repair safety, and grounding instructions.
Details safety for multiple dryer venting, non-stationary locations, and temperature considerations.
Identifies key components and connections visible from the front of the dryer.
Provides dimensional views and information about installing the dryer in a washer-dryer stack.
Explains installation on a cement base and details regarding the coin mechanism option.
Covers safe transport, leveling procedures, air gaps, and operational restrictions.
Specifies voltage, frequency, plug type, and safety device (RCD) for electrical connection.
Provides critical general advice regarding exhaust duct installation and room ventilation.
Explains how to measure and calculate the total effective length of the exhaust duct.
Offers advice on duct materials, assembly, efficiency, and the impact of bends.
Demonstrates calculating total duct length and determining required diameter with an example.
Explains how to determine and change the position of the dryer's exhaust connection.
Illustrates connecting flexible hoses or rigid pipes for window and wall venting.
Provides instructions and warnings for connecting the dryer to a chimney or vent flue.
Describes the direct wall connection method, including necessary accessories and dimensions.
Details requirements for collective exhaust systems, including non-return flaps and duct diameter increases.
Guidance on environmentally responsible disposal of packaging and old appliances.
Explains how to access and navigate the main settings and submenus.
Details how to adjust language, buzzer volume, anti-crease function, and clock display.
Covers adjustments for display contrast, standby mode behavior, and lengthening the cooling phase.
Guides on how to access the supervisor level menu by entering the access code.
Explains language settings and control modes (Household vs. Laundromat) within the supervisor level.
Details options for welcome menus, language sorting, and timer function activation.
Covers settings for airway and lint filter cleaning reminders, and residual moisture display.
To Next Page
