The menu "Settings - Supervisor level" is locked with a
code to prevent unauthorized access (except
Language J). It must be activated by Technical Service.
Settings Back A
Supervisor level
Access via code
^
Select "Access via code" and confirm.
Entering the code
^ Enter the code "000" (factory default).
If a wrong code is entered three times, the code entry will
be locked for 1 hour.
0 __
Please enter code
^ Turn the jog shuttle until the first digit shows. Confirm the
digit. Enter the second and third digits.
000
Please confirm code
OK
H
Back A
H
^
Confirm the code.
Settings - Supervisor level
57
To Next Page
Loading...
