EasyManua.ls Logo

Miele PT 7136 - Exhaust Venting Installation; General Exhaust Venting Notes

Miele PT 7136
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General notes
,
The dryer must only run if the
moist exhaust air from the drying
process is conducted outside by an
installed exhaust duct vent.
,
Disconnect the dryer from the
power supply during installation of
the exhaust duct.
The exhaust connection (e.g. a wall
pipe) must be installed, so that the
moist exhaust air cannot get drawn
back into the installation room and
cause constructional damage or
unreasonable disturbance.
The room air, which is taken in when
the dryer is in operation, is blown out
via the exhaust vent. It is important,
particularly if the room is small, to
ensure adequate ventilation and air
supply opening a window or
installing unlockable ventilation
openings in the wall., for example,
will allow more air to enter the room.
Otherwise drying times and energy
consumption may increase.
Danger of suffocation by suction of
exhaust fumes.
Installation of exhaust venting
41

Other manuals for Miele PT 7136

Related product manuals