Miele PT 8337 - Page 29

y
Power failure
Program stop.
Press Start.
f
^
Press "START" to continue the program.
§
Heating system fault
Program stop. Press Start.
Program runs with cold water.
f
^
Press "Start" to continue the program without
heating. Contact Technical Service.
§
Heating system fault
Contact Technical Service.
if restart w/o success.
f
^ Contact Technical Service.
§
Pressure sensor fault
Contact Technical Service
if restart w/o success.
f
^
Contact Technical Service, if restart is not
successful.
§
Gas system fault
Contact Technical Service
if restart w/o success.
f
If the error occurs immediately after the program
start:
^
Open the gas valve and press "Start".
If the error occurs in the middle of a program run, the
gas pressure may have decreased due to use of
additional gas appliances.
^
Press the "Start" button.
^
Contact the Technical Service Department, if
restart is not successful.
§
Card fault
Reinsert card correctly in card
reader.
A
^
Insert the card properly into the card reader.
Frequently asked questions
29