This machine must only be installed and
commissioned by a Miele authorised technician.
This appliance must be installed in accordance with
local and national safety and building regulations by
a suitably qualified engineer (Gas Safe registered in
the UK). It must only be operated in a room with
sufficient ventilation.
Read the instructions supplied with the appliance
before installing and using it for the first time.
Do not install the tumble dryer in a room where there
is a risk of frost occurring.
,
The machine must not be transported without
its transport pallet in position.
Once the dryer reaches its final location, use a
suitable lifting mechanism to lift the dryer off its
transport pallet.
To ensure suitable access is maintained for future
maintenance and service work, please ensure that
the minimum distances between the machine and the
wall specified on the installation diagram are strictly
observed.
PT 825X / 833X / 840X PT 850X / 880X
x 1400 mm 1640 mm
y 906 mm 1206 mm
z 852 / 1035 / 1164 mm 1018 / 1384 mm
Installation and connection
31
To Next Page
