Need help?Do you have a question about the Miele PW 5082 and is the answer not in the manual?
Instructions for environmentally friendly disposal of packing materials and safety precautions for plastic wrappings.
Guidelines for disposing of old electrical and electronic machines safely and responsibly.
Tips on reducing energy and water consumption and advice on detergent usage.
Defines the machine's intended use and general safety practices for operation.
Covers electrical safety, earthing, repairs, and disconnection procedures.
Details correct operation, handling of chemicals, and specific warnings.
Guidance on approved accessories and safe disposal of old machines.
Overview of the machine's control panel buttons and their functions.
Explanation of the display interface and how to navigate settings.
Instructions on removing transit bars to prevent machine damage.
Guide to setting the current time of day on the machine's display.
Steps to run the initial programme after setup.
Guidance on sorting laundry by colour, care labels, and general tips.
Instructions on how to load the machine drum correctly for optimal results.
Guidance on choosing the most appropriate wash programme for the laundry.
Explanation of washing, drying, ironing, and professional cleaning symbols.
Brief guide to sorting laundry before washing.
Instructions for loading the machine drum correctly.
Guide to selecting wash programmes and adjusting spin speed.
Explanation of the Pre-wash additional option.
Instructions on using the delay start function.
Information on how the payment system affects programme selection and credit.
Steps to start the selected wash programme and understanding the display.
Instructions on how to unload the machine and switch it off.
Table showing maximum spin speeds for different programmes.
Explanation of how final spin speed affects interim spin speed.
How to set the desired end time for a programme using delay start.
Steps to initiate a programme with the delay start function active.
How to adjust the programmed delay start time.
Procedure for cancelling the delay start function.
Details on the Cottons programme: temperature, load, detergent, and notes.
Information on the Minimum iron programme: temperature, load, detergent.
Details for the Intensive wash programme: temperature, load, options, and detergent.
Information on the Delicates programme: temperature, load, notes, and detergent.
Details for the Woollens programme: temperature, load, and detergent.
Information on the Mini Quick wash programme: temperature, load, note, and detergent.
Details on the Extra rinse option: load.
Information on the Drain/Spin function: load and notes.
Explanation of symbols used in the programme sequence chart.
Procedure for cancelling a programme that has already started.
How to pause and resume a running programme.
Instructions on how to select a different programme.
How to adjust the spin speed before the final spin begins.
Guidance on detergent amounts, water hardness, and types of agents.
Advice on water softeners, multi-component washing, and dye removers.
Instructions for dispensing fabric conditioners and liquid starch.
Chart showing relay control assignments for external dispensing systems by programme.
General instructions for cleaning the machine casing and control panel.
Step-by-step guide to removing and cleaning the detergent dispenser drawer.
Instructions for cleaning the siphon and siphon tube in the dispenser.
How to clean detergent residues and limescale from the dispenser housing.
Procedure for cleaning filters in the inlet hose and water inlet valve.
Troubleshooting steps when the washing programme fails to start.
Interpreting and resolving fault messages displayed by the machine.
Solutions for common issues like shaking, pump noises, and residue.
Troubleshooting tips for poor wash results, residue, and greasy laundry.
Steps to resolve issues with the drum door not opening.
Procedure for resuming a programme after a power interruption.
Information on when to contact Miele Service Department.
Explanation of the peak load cut-out function and its display message.
How to open the drum door in emergencies like drain blockage or power failure.
Procedure for draining the machine, including using the drain filter.
Detailed steps for cleaning the drain filter and impeller.
Manual procedure to open the drum door using a screwdriver.
Contact information for service and repairs under warranty.
Explanation of the PC interface used for diagnostics and data updates.
Information on availability of optional accessories from Miele Professional.
Front, rear, and side views, including dimensions for installation.
Transporting, installing, and ensuring machine stability.
Choosing installation surfaces and removing/refitting transit bars.
Securing the machine on a plinth and levelling it correctly.
Connecting to water supplies (cold, hot) and water drainage systems.
Ensuring safe and compliant electrical connection of the machine.
Table of the machine's height, width, depth, weight, capacity, and other technical data.
How operators access and change settings via the Settings menu.
How to change the display language and its implications.
Procedure for accessing supervisor settings using codes and changing the access code.
Adjusting display contrast, brightness, standby mode, and time of day.
How to change the access code for supervisor level settings.
Configuring memory, load control, and water options for wash cycles.
Adjusting rinse counts, durations, temperatures, and pre-rinse options.
Altering the number of rinses for the Minimum iron programme.
To Next Page
General
