Need help?Do you have a question about the Miele PW 5064 MopStar 60 and is the answer not in the manual?
General| Model | PW 5064 MopStar 60 |
|---|---|
| Load Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Heated | Yes |
| Energy Efficiency Class | A+++ |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Display | Yes |
| Product Type | Washer |
| Drum Volume | 53 l |
| Dimensions (H x W x D) | 850 x 595 x 725 mm |
| Programs | Mop |
Information on the environmentally friendly disposal and recycling of packaging materials used for the machine.
Guidance on the proper disposal of electrical and electronic machines to protect health and the environment.
Advice on reducing energy and water consumption, and proper detergent use for efficient washing.
Details on the intended use of the machine and general safety requirements for operation and maintenance.
Ensuring electrical safety, proper installation, and the importance of authorized repairs for machine safety.
Instructions for safe operation, including load limits, temperature considerations, and foreign object prevention.
Guidelines for using Miele-approved accessories and warnings regarding chemical contact with stainless steel surfaces.
Explanation of the buttons and indicators on the machine's control panel for operation.
Description of the display's capabilities, including altering values, selecting options, and showing programme status.
Steps for initial machine preparation, including language selection and setting the current time of day.
Instructions for completing the initial wash programme to prepare the machine for regular use.
Step-by-step guide covering sorting, loading, programme selection, detergent addition, and unloading laundry.
Guidance on properly loading the drum and selecting the appropriate wash programme for optimal results.
Instructions on dispensing the correct amount of detergent and initiating the wash programme.
Procedures for safely unloading laundry at the end of a wash cycle, including anti-crease phase.
Details on final spin speeds for various programmes and options to omit or adjust spinning cycles.
Instructions on how to select, set, alter, and cancel the delay start function for programmes.
A comprehensive list of available programmes, including fabric types, options, and load capacities.
Explanation of sequence stages like pre-spin, pre-wash/pre-rinse, and anti-crease phases.
Procedures for cancelling, interrupting, or altering programmes after they have started.
Guidance on detergent dispensing based on load size, soiling, and water hardness, including fabric conditioner.
Information on using dyes and warnings against colour run or dye removers due to potential machine corrosion.
Details on connecting and using an external liquid dispensing system with the machine.
Explanation of the empty sensor feature for external liquid detergent containers and related fault messages.
Instructions for cleaning the machine's casing, control panel, drum, and detergent dispenser drawer.
Procedure for cleaning the filters in the inlet hose and water inlet valve to protect the machine.
Troubleshooting steps for when the programme does not start or is interrupted by a power cut.
Guidance on interpreting fault messages and resolving common operational problems like door opening.
Troubleshooting tips for unsatisfactory wash results, including residue issues and poor cleaning.
Information on the PC/Optical interface for service technicians and availability of optional accessories.
Diagrams of the front and rear views, and instructions for positioning the machine correctly.
Steps for preparing the installation surface, removing transit bars, levelling, and securing the machine.
Guidance on connecting the machine to cold and hot water supplies and the drainage system.
Instructions for safe electrical connection, including earthing requirements and mains connection.
How to access and adjust settings like Suds Cooling, Display Contrast, and Display Brightness.
Managing access codes, setting time, language, and configuring standby behaviour.
Customizing water intake (hot/cold) for pre-wash, main wash, and rinses, and water pressure settings.
Modifying temperatures, disinfection parameters, spin treatments, and finishing options for various programmes.
Adjusting the number of rinses for Cotton and Minimum Iron programmes, and enabling pre-rinse options.
Configuring temperature display units (°C/°F) and enabling energy usage control for optimized efficiency.
To Next Page
