Changing the programme order
The order of the programme in progress can
be changed or programme blocks can be
repeated.
^ Press the f button and the programme
will stop.
1 Cottons
Programme stop
i ü f
^ After pressing the ü button the current
area, block or step will appear in the
display.
See also "Programme structure" in the
Progamming Manual.
Reorganise -> Cottons
Area 2: Main wash e
S A
Area: 2 Main wash
Block 1: Main wash
Step: Wash time 2 -
S A
^ Turn the rotary dial to alter the area and
then press it to confirm your selection.
Area: Select 1 Pre-wash, 2 Main wash or 3
Rinses and confirm your selection.
^ Turn the rotary dial to alter the block and
then press it to confirm your selection.
Block: Select Pre-wash 1-10, Main wash
1-10 or Rinses 1-10 and confirm your
selection.
^ Turn the rotary dial to alter the step and
then press it to confirm your selection.
Select the required programme step and
confirm your selection.
^ Press the S "Save" button and then press
START to reorganise the programme order
or press the A "Back" button to override
the programme stop and not change the
programme order.
Additional options
M.-Nr. 06 572 495 23
To Next Page
Loading...
