When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead can be replaced. Check
them from time to time and replace
them if the pile has worn down.
To replace the thread lifters
Floor head SBD 350-3
^
Use a suitable tool to remove them
from the slots a.
^
Fit new thread lifters b.
Floor head SBD 450-3 (S2130 only)
^ Use a suitable tool to remove them
from the slots.
^ Fit new thread lifters.
Spare parts are available from your
Miele Vacuum Cleaner Specialist, from
the Miele Spare Parts Department (see
back cover for contact details) or the
internet at www.miele-shop.com.
Maintenance and care
20
To Next Page
Loading...
