Power cord
Unwind the cable completely to aid
the vacuum in dissipating heat.
Unwinding
^
Hold the plug and pull out the power
cord to its full length.
,
To reduce the risk of electric
shock, the vacuum has a polarized
plug (one blade is wider than the
other). This plug will fit in a polarized
outlet only one way. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not alter the
plug in any way.
Danger of overheating and damage.
Rewinding
^ Unplug the vacuum from the outlet.
^
Step on the rewind switch to auto
-
matically rewind the power cord.
Lightly hold the plug so that it does
not whip around when rewinding.
Use
15
To Next Page
Loading...
Need help?
General
