Miele S 280i - Servicing Floor Attachment Components

Maintenance
Changing the fiber catcher
From time to time inspect the fiber
catcher in the mouthpiece of the floor
attachment.
If the pile is worn, the fiber catcher
should be replaced.
To replace:
1) Remove the worn fiber catcher
from its slots using a dull knife or
screwdriver.
2) Fit a new fiber catcher into the
slot.
New fiber catchers are available at
your local Authorized Miele Dealer.
Servicing the floor roller
Occassionally hair, lint and fluff will
become trapped in the roller of the
floor attachment.
To remove this material:
1) Lift up on axle handle.
2) Slide out axle.
3) Lift out roller.
Remove any foriegn material; after
cleaning the roller, replace by rever-
sing the above process.
22