Miele S 280i - Assembling the Vacuum Cleaner; Connecting the Suction Hose; Using the Hose as a Blower

Assembling the vacuum cleaner
Connecting the suction hose to the
vacuum cleaner
@ Insert the “elbow” hose coupler
into the suction opening, as
shown, until it snaps into position.
@ Jo disconnect the hose from the
vacuum Cleaner, press the locking
button on the “elbow” and lift out of
the suction opening.
NOTE: The suction hose may be
connected to the exhaust end of
the vacuum cleaner to be used as a
blower and also to unclog the
hose, wand, etc.
@ Open tool caddy.
@ Connect hose “Elbow” and move
filter cover to the left.
After Completion of the blowing
operation:
@ Remove hose “Elbow”.
@ Close tool caddy. The filter will be
opened automatically.