Miele S 280i - Telescopic Wand Holder and Adjustments; Floor Nozzle Adjustments

Assembling the vacuum cleaner
Telescopic Wand Holder
Before attaching the floor nozzle, at-
tach the retractable wand holder to
the telescopic suction wand and fold
down. In the unfolded position, the
wand holder allows the entire wand
(including nozzle) to be attached by
placing the holder into the receptacle
on the canister. This allows for easy
transportation and storage.
Attaching the floor nozzle or Turbo-
brush
The floor nozzle is recommended for
routine cleaning of rugs, carpeting
and bare flooring such as parquet,
tile, linoleum or stone.
@ Fit the telescopic suction wand
into the circular opening of the
floor nozzle, as shown by the ar-
row. The floor nozzle must lock into
place securely.
@ Torelease the floor nozzle from the
suction wand, press the locking
button.
@ The floor nozzle can be adjusted
to conform to the type of flooring to
be cleaned.
@ To clean bare floors, depress
SYMDOI im.
The brush is now protruding.
@ To clean rugs and carpeting,
symbol - Should be depressed.
This retracts the brush.