Need help?Do you have a question about the Miele S 326i and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | S 326i |
| Category | Vacuum Cleaner |
| Language | English |
Key safety and repair guidelines for servicing vacuum cleaners.
Instructions for cleaning vacuum cleaner parts and the dust compartment.
Details the construction and major components of canister vacuum cleaners.
Compares features across different Miele vacuum cleaner models.
Provides detailed technical specifications for various Miele vacuum models.
Lists standard and optional accessories for Miele canister vacuums.
Explains the electrobrush plug system and its modifications for specific models.
Details the dustbag and filter system, including Super Air Clean filter.
Explains how the dustbag change indicator works for different models.
Describes suction power and its relation to negative pressure and air throughput.
Covers manual and automatic power selection methods for vacuum cleaners.
Instructions for removing and re-installing the dustbag compartment lid.
Procedures for handling the accessory compartment lid.
Steps for removing and installing the dustbag holder for various models.
Guide to removing and replacing the dust channel assembly.
Details on removing and installing the dustbag change indicator.
Procedures for removing and installing the cap assembly.
Instructions for removing and re-installing the rear casing of the vacuum.
Steps to remove and install the foot switches for different models.
Instructions for handling the potentiometer and suction power selector.
Procedure for removing and installing the electronic module on S 4xx models.
How to remove the fault/overheat indicator lamp.
Steps to remove and install the plug housing.
Procedures for accessing and removing the on/off switch.
Guide to accessing and removing the flush socket outlet.
Steps for removing the sensor on automatic models.
Instructions for removing and installing the cord reel.
Procedures for removing and replacing the power cord.
Detailed steps for removing and installing the motor assembly.
Instructions for removing and replacing the motor electronic speed control board.
Guide for replacing motor brushes, emphasizing simultaneous replacement.
Procedure for removing the electric brush socket.
Information on suction hoses with integrated wiring and electric brush connections.
Steps to access and work on the turbo brush parts.
Instructions for removing and installing the buffer/bumper strip.
Steps to remove the grill for the HEPA filter.
Information on an improved castor for better floor-running.
Explains a possible cause for issues related to dustbag compartment sealing.
Addresses poor suction performance and its potential causes and remedies.
Discusses poor blower performance and how to improve it.
Explains how to adjust the dustbag change indicator sensitivity.
Steps to check and troubleshoot low suction power.
Diagnoses why the motor might not operate and provides a remedy.
To Next Page