Need help?Do you have a question about the Miele S 334i and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | S 334i |
| Category | Vacuum Cleaner |
| Language | English |
General rules for servicing, maintenance, and safety compliance.
Breakdown of the main parts of S 3xx series vacuum cleaners.
Breakdown of the main parts of S 4xx series vacuum cleaners.
Technical specifications for S 247i to S 256i models.
Technical specifications for S 269i to S 282i models.
Technical specifications for S 3xx models.
Technical specifications for S 4xx models.
Lists standard accessories included with the vacuum cleaners.
Lists optional accessories available for the vacuum cleaners.
Details on Air Clean Plus, Super Air Clean, Active Air Clean, and S-Class filters.
Explains how the dustbag change indicator works and how to test it.
Explanation of suction power curves and factors affecting it.
How power is regulated in manual and automatic models.
General guidelines for service and repair by qualified personnel.
Specific steps for removing the dustbag compartment lid on S 25x models.
Specific steps for removing the dustbag compartment lid on S 3xx models.
Specific steps for removing the dustbag compartment lid on S 4xx models.
Steps for reassembling the accessory compartment lid on S 2xx models.
Instructions for removing and re-installing the dustbag holder on S 3xx models.
Instructions for removing the dust channel assembly for S 3xx and S 4xx models.
Steps for removing the cap assembly from the base on S 25x models.
Instructions for removing the rear casing on S 25x models.
Instructions for removing the rear casing on S 4xx models.
Steps for removing foot switches on S 25x and S 27x models.
Steps for removing the foot switch on S 3xx models.
Procedures for replacing potentiometers and switch covers on S 2xx models.
Notes on overheat light and potentiometer replacement for S 3xx models.
Procedures for replacing rotary and slide potentiometers on S 4xx models.
How to remove indicator lamps on S 2xx models.
Steps for removing the on/off switch on S 25x models.
Steps for removing the cord reel on S 23x models.
Steps for removing the cord reel on S 27x models.
Steps for removing the cord reel on S 3xx models.
Steps for removing and disconnecting the power cord on S 27x models.
Detailed steps for removing the motor assembly on S 25x models.
Detailed steps for removing the motor assembly on S 27x models.
Detailed steps for removing the motor assembly on S 3xx models.
Steps for removing the motor assembly with holding bracket or central bearing on S 4xx models.
Steps for removing the motor electronic board on S 3xx models.
Information on the suction hose with integrated wiring for S 254i/S 255i.
Information on the suction hose with integrated wiring for S 278i.
Steps for removing the bumper strip on S 3xx models.
Details on a modified castor for improved floor-running properties.
Explains causes for dirty dustbag compartments and offers a remedy.
Identifies a slipped motor seal as a cause for poor suction and provides a remedy.
Suggests installing a blower plate to improve blower performance.
Explains how to adjust the dustbag change indicator setting on S 3xx models.
Lists checks to perform if the suction power is too low on S 3xx models.
Troubleshooting steps for when the motor does not operate, often due to worn brushes.
To Next Page