Miele S 548 - Replacing the Active Air Clean Filter and the Active HEPA Filter

Replacing the "Active Air
Clean" filter and the "Active
HEPA" filter
^
Open the dust compartment lid.
^
Release the catch and remove the
filter.
Do not use more than one filter at a
time.
^ Insert the new filter so that it engages
at the back, then close the catch.
^ Close the dust compartment lid firmly
until it clicks into place.
If you wish to replace the Active Air
Clean filter or Active HEPA filter with
a Air Clean filter see "Maintenance
and care - Replacing one type of
filter with another".
Maintenance and care
28