Connecting the handpiece and
telescopic wand
^
Insert the handpiece into the
telescopic wand. Use inlet guides to
direct insertion.
^
To release the handpiece from the
telescopic wand press the locking
button (see arrow) and pull the
handpiece away from the telescopic
wand with a slight twist.
Adjusting the telescopic wand
This telescopic wand consists of two
sections which are height-adjustable.
^ Press the adjustment button to
release the tubes and adjust to the
desired height.
Attaching the standard floor
brush
(depending on model)
^
Insert the wand into the floor brush
and twist until it locks with a click.
To release the floor brush from the
telescopic wand, press the locking
button (see arrow) and pull the wand
out of the floor brush.
Before using the vacuum cleaner
11
To Next Page
Loading...
