EasyManua.ls Logo

Miele S 6000 - Exhaust Filter Replacement

Miele S 6000
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replacing the exhaust filter
Depending on model, the vacuum
cleaner will be equipped with one of the
following exhaust filters:
a Air Clean
An "Air Clean" filter is supplied with
every box of Miele dustbags. It should
be replaced each time a new box of
bags is started.
b Active Air Clean SF-AAC 50 (black)
c Active HEPA SF-AH 50 (blue)
An "Active Air Clean" or "Active HEPA"
filter should be changed approximately
once a year. Change the filter sooner if
it is obviously soiled or no longer
effective.
Replacing the "Air Clean" filter
Do not use more than one filter at a
time.
^
Open the dust compartment lid.
^
Squeeze the release for the filter
frame and open until it clicks.
^
Grasp one of the two clean corners
(see arrow) to remove the used Air
Clean exhaust filter.
^
Insert the new filter.
If you wish to replace the Air Clean
filter with an Active Air Clean filter or
Active HEPA filter see "Maintenance
and care - Exchanging exhaust
filters".
^
Close the dust compartment lid firmly
until it clicks into place.
Maintenance and care
21

Related product manuals