Replacing the "Active Air
Clean" filter and the "Active
HEPA"filter
Do not use more than one filter at a
time.
^
Open the exhaust filter compartment
lid.
^
Remove the exhaust filter.
^ Insert a new exhaust filter.
^ Close the exhaust filter compartment
lid.
If you wish to use an Air Clean filter
see "Maintenance and care -
Exchanging exhaust filters".
Resetting the exhaust filter change
indicator
If your vacuum cleaner has a reset
button, it must be pressed each time
the exhaust filter is changed.
^
Turn the vacuum on.
^
Press and hold the reset button until
the "Exhaust filter change indicator"
indicator goes out.
The indicator is only reset if pressed
while lit. If the indicator is pressed
before it lights it will not be reset.
Maintenance and care
27
To Next Page
