Attaching the suction hose
^
Insert the hose connector into the
socket until it clicks into position.
Removing the suction hose
from the cleaner
^ Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connecting the suction hose
and the suction tube
^
Insert the hand piece of the suction
hose into the suction tube until it
clicks into position. To do this, line up
the guides on the two pieces.
^
To release the hand piece from the
suction tube, press the locking button
(see arrow) and pull the hand piece
away from the suction tube.
Preparing for use
9
To Next Page
Loading...
