Attaching the floor brush
^
Insert the telescopic wand into the
floor brush and turn in either direction
until it locks with a click.
^
To release the floor brush from the
telescopic wand, press the locking
button (see arrow) and pull the wand
out of the floor brush.
The floor brush is suitable for cleaning
carpets, rugs, and hard surfaces. For
flooring susceptible to scratches, use
one of the special Miele floor brushes
(see "Optional accessories").
Observe the cleaning instructions of
the floor manufacturer.
Adjusting the floor brush
Vacuum carpets and rugs with the
brush retracted:
^
Press the foot switch marked g.
Clean hard flooring with the brush
protruding:
^
Press the foot switch marked h.
Before using the vacuum
12
To Next Page
