What if the vacuum cleaner turns off while vacuuming?
Possible fault Fix
The vacuum has overheated. The
temperature limiter switched off the
vacuum automatically.
Turn off the vacuum at the On - Off
switch.
Check the telescopic wand and the
suction hose for blockages.
Replace the dustbag or filters if
necessary.
Unwind the full length of the power
cord.
Allow the vacuum to cool down for 30
minutes.
What if the suction of the vacuum is not strong enough?
Possible fault Fix
The suction power selector is set too
low.
Increase the suction level.
The dustbag is full or clogged with fine
dust particles.
Replace the dustbag.
Frequently asked questions
27
To Next Page
Loading...
