Miele S246i - Vacuum care; Replacing Thread Catcher Pads; Removing Roller Hair and Threads

Changing the thread catcher
The thread catcher pads on the bottom
of the rug and floor tool should be
checked occasionally. Replace the
pads if they appear worn.
^
Use a screwdriver as shown to
remove the thread catcher from the
slot.
^
Press the new thread catcher into the
slot.
New thread catcher pads may be
purchased from your Miele vacuum
dealer.
Removing threads or hair
wrapped around the roller
1. Unlock the axle lever.
2. Pull out the roller axle.
3. Remove the roller.
Remove all threads or hair and
reassemble in the reverse order.
Vacuum care
25