Connecting the handle to the
telescopic wand
^
Insert the handle into the telescopic
wand until it clicks into position. To
do this, line up the guides on the two
pieces.
^
Press the release button (arrow) if
you want to separate the parts and
pull the handle out of the telescopic
wand with a slight twist.
Adjusting the 2-piece
telescopic wand (depending
on model)
One part of this telescopic wand is
packed inside the other and can be
adjusted to suit your height for
comfortable vacuum cleaning.
^ Press the telescopic wand release
button to release the tubes and
adjust to the required height.
Adjusting the 3-piece
telescopic wand (depending
on model)
This telescopic wand has three
sections. Two sections of the tubes are
packed together inside a third outer
tube.
^
Press the release button a to release
the lower tube and pull it right out
until it clicks. Press the button again
when you want to retract the tube
again. The tube will click into place.
^
Press the telescopic wand release
button b to release the tubes and
adjust to the required height.
Preparing for use
13
To Next Page
Loading...
