In the event of a fault that you cannot
easily remedy, please contact
–
your Miele Vacuum Cleaner
Specialist or
or
–
Miele.
The telephone number and address
for Miele is given on the back page.
Electrical connection
All work should be carried out by a
suitably qualified and competent
person in strict accordance with
national and local safety regulations.
The voltage and rated load are given
on the data plate located underneath
the vacuum cleaner. Please ensure that
these match the household mains
supply. The fuse rating is quoted on the
plug.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230V/50Hz a.c. single phase
supply.
Test Marks.....................Electrical safety
......................................C-Tick Mark
Electrically suppressed
according to..................AS/NZS 1044
After sales service / Electrical connection
35
To Next Page
Loading...
