Interrupting operation
To pause the appliance during
operation:
^
Press the stand-by button - on the
handle.
,
The stand-by button is designed
to pause the vacuum cleaner for
short periods of time whilst
vacuuming. Otherwise there is a
danger of overheating.
At the end of the pause you can do one
of the following:
^ Press the stand-by button - again to
switch the vacuum cleaner back on at
the setting you were using before
pausing it.
^ Press the + button to switch the
vacuum cleaner back on using the
highest power setting.
^ Press the - button to switch the
vacuum cleaner back on using the
lowest power setting.
Use
21
To Next Page
