Adjusting the standard
floorhead
It is important to observe the flooring
manufacturer’s cleaning and care
instructions.
The following symbols are found on
your vacuum cleaner's floorhead
depending on the model.
–
ö and ä
–
% and )
Vacuum carpets and rugs with the
brushes retracted:
^ Press either the ö or % foot control.
Clean hard flooring which is not
susceptible to scratching with the
brushes protruding:
^ Press either the ä or ) foot control.
Clean hard flooring with deep cracks
or spacing between floorboards with
the brushes protruding.
AirTeQ floorhead
This aerodynamic and powerful
floorhead is specially designed to
achieve good cleaning results while at
the same time being very energy
efficient.
,
If you find that a great amount of
effort is required to manoeuvre the
AirTeQ floorhead, reduce the
suction power to a suitable level
(see "Adjusting the suction power").
Preparing for use
15
To Next Page
Loading...
