Miele T 8861 WP Edition 111 User Manual

Changing the lamp
Disconnect the machine from the
mains electricity supply.
^
Open the door.
You will find the interior lamp cover at
the top of the drum aperture.
^ Insert a suitable tool, such as a wide
bladed screwdriver, under the side
edge of the lamp cover as illustrated.
^
Apply a little pressure and, whilst
doing so, turn your wrist in the
direction of the arrow to open the
cover.
The cover will open downwards.
The temperature resistant lamp should
only be ordered from your Miele
Chartered Agent or from Miele.
The lamp specification and
maximum wattage are stated on the
data plate and on the lamp cover.
^
Replace the lamp.
^
To close the cover, push it upwards
and press it on the left and right until
you hear it click into position.
,
Ensure that it is fitted into
position securely, as any moisture
could cause a short circuit.
Problem solving guide
39

Miele T 8861 WP Edition 111 Specifications

General

Type	Heat Pump Dryer
Capacity	8 kg
Energy Efficiency Class	A++
Dimensions (HxWxD)	850 x 595 x 634 mm
Appliance Placement	Freestanding
Loading Type	Front load
Delay Start	Yes
Child Lock	Yes
Color	White
Drying Programs	Cottons, Delicates, Express, Outdoor, Proofing
Cycle Time	Varies by program