Before using for the first time
20
Installation
Before using the appliance for the
first time, check that you have fol-
lowed all the instructions under “In-
stallation”.
Read these operating instructions,
paying particular attention to the in-
formation provided under “Installa-
tion”.
Removing the protective foil and
stickers
Remove:
- Any protective film from the door
- Any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Downtime after installation
Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer wait
for at least one hour before switching
it on.
Follow the procedure for using
for the first time outlined in
these instructions
Read “1. Notes on correct laundry
care” and “2. Load the tumble dryer”.
You can then load the dryer and se-
lect a programme as described in “3.
Select a programme and start it”.
To Next Page
Loading...
Need help?
General
