Cleaning and care
43
Cleaning the plinth filter
Clean the plinth filter whenever the
indicator light comes on or when
the programme running time seems to
be taking longer than usual.
To make the indicator light go out,
open and close the door while the
tumble dryer is switched on.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
The right-hand guide pin comes out
when the plinth filter is removed. The
guide pin prevents the access panel
from closing without the plinth filter.
To Next Page
Loading...
