Miele TDA 140 C User Manual

Cleaning and care
28
 Then flush the unit through from the
front.
 Check the condenser unit again for
any visi
ble fluff and if necessary flush
it through again until it has all gone.
Repeat as required.
 Also mak
e sure that the rubber seals
are clean.
The rubber seals must not be removed
and must be free of kinks.
 Shak
e the water off the condenser
unit until no more droplets of water
are visible.
Checking and cleaning the
condenser unit housing
 Remove any soiling still visible inside
the housing by hand using a damp
cloth.
 Do no
t try and access areas you
cannot reach by hand!

Miele TDA 140 C Specifications

General

Cord length	2 m
Control type	Buttons, Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	-
Drum capacity	7 kg
Current	10 A
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	50000 g
Depth with door open	1060 mm