Programmable functions
56
Changing the function of the
a
irways indicator
Fluff should be removed after drying.
The
Clean out airways in
dicator light
will remind you to clean the filters
when a certain amount of fluff has
collected in them. You can decide at
what level of fluff this reminder should
be given.
You will have an idea of which option to
select aft
er a few drying programmes.
Certain faults can also cause this
indicat
or light to come on at other
times.
Follow steps (,, ...)
to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
t
o
Finish.
P
ress
Start and k
eep it pressed in
whilst carrying out steps -.
Switch the dryer on.
W
ait until the indicator light for the
Start butt
on lights up constantly . . .
.
. . and then release the
Start
b
utton.
T
urn the programme selector
to
Woollens.
The Empty container indic
ator light will
flash slowly once.
The option selected will be displayed
by a number
which will alternate with
.
The C
lean out airways indicator
light is deactivated
The C
lean out airways indicator
light only comes on when there is
a heavy build-up of fluff
(The
Clean out airways in
dicator light
will also flash once)
F
actory default setting
(The
Clean out airways indicator light
will also flash twice)
The C
lean out airways indicator
light comes on when there is a
slight build-up of fluff
(The
Clean out airways indicat
or light
will also flash three times)
P
ressing the
Start butt
on switches
between the options.
Sw
itch the dryer off.
The setting you have selected is now
st
ored in memory. You can change it
again at any time.
To check the setting:
C
arry out steps -.
Switch the dr
yer off after checking.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
