Miele TDA 140 C User Manual

Problem solving guide
34
Problem Cause and remedy
The drying process
goes on
too long or
even switches off *
The room in which the dryer is located is too warm.
 V
entilate the room thoroughly.
Detergent residues, hair and fine fluff can clog the
filt
ers.
 Clean
the filters and the condenser unit (see
"Cleaning and care").
The vents below the door are blocked.
 Move any objec
ts, such as a laundry basket, away
from the dryer.
The fluff filters were still wet when replaced.
 The fluff filt
ers must be dry.
The laundry is too damp.
 Spin using a higher spin speed in the washing
machine.
The tumble dryer has been overloaded
 Do not e
xceed the maximum load for the
programme selected.
Metal zips have prevented the dryer from registering
the correct moisture level.
 Op
en the zips next time.
 If
the problem recurs, dry these items using the
Warm air timed drying programme.
* Before starting another programme:
 Switch the dr
yer off and then on again.

Miele TDA 140 C Specifications

General

Cord length	2 m
Control type	Buttons, Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	-
Drum capacity	7 kg
Current	10 A
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	50000 g
Depth with door open	1060 mm