EasyManuals Logo

Miele TDA 140 C User Manual

Miele TDA 140 C
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Installation and connection
44
1. Adapter
2. Nut
3. Hose clip
4. End of the hose (secured with the
hose holder)
5. Non-return valve
6. Tumble dryer drain hose
Fi
t adapter 1 to the sink drain outlet
using nut 2.
The nut is usually fitted with a washer
which must be removed.
A
ttach the end of the hose 4 to
adapter 1.
Use the ho
se holder.
Use a scr
ewdriver to tighten hose clip
3 up close to the nut.
Fi
t non-return valve 5 to tumble dryer
drain hose 6.
Non-return valve 5 ha
s to be fitted so
that the arrow points in the direction
of flow (i.e. towards the sink).
Secur
e the non-return valve using
hose clips.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TDA 140 C and is the answer not in the manual?

Miele TDA 140 C Specifications

General IconGeneral
Cord length2 m
Control typeButtons, Rotary
Loading typeFront-load
Drying systemCondensation
Product colorWhite
Built-in displayYes
Appliance placementFreestanding
Cycle time109 min
Noise level63 dB
Drying class-
Drum capacity7 kg
Current10 A
AC input voltage220-230 V
Energy consumption4.14 kWh
Annual energy consumption494 kWh
Weight and Dimensions IconWeight and Dimensions
Depth580 mm
Width595 mm
Height850 mm
Weight50000 g
Depth with door open1060 mm

Related product manuals