Miele TMG 640 WP User Manual

Cleaning and care
43
Plinth filter
Only clean the plinth filter when
Cl
ean out airways lights up.
To delete Cl
ean out airways: Switch the
dryer off and back on again / confirm
OK.
Removing the plinth filter
 P
ress the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
 P
ull the plinth filter out by the handle.
Removing the plinth filter will cause the
righ
t hand guide pin in the dryer to
come out. This pin ensures that the
heat exchanger access panel can only
be closed if the plinth filter is inserted
the right way round.
Cleaning the plinth filter
 P
ull the handle out of the plinth filter.
 Cle
an the filter thoroughly under
running water.
 Squee
ze the plinth filter thoroughly.
 The plinth filt
er must not be
replaced dripping wet as this can
cause a fault.
 Use a damp cloth t
o remove any fluff
from the handle.

Miele TMG 640 WP Specifications

General

Door hinge	Left
Control type	Buttons, Rotary
Loading type	Front-load
Drying system	Heat pump
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	156 min
Noise level	64 dB
Drying class	-
Drum capacity	8 kg
Heat source	Electric
Energy consumption	- kWh
Annual energy consumption	235 kWh

Weight and Dimensions

Depth	643 mm
Width	596 mm
Height	850 mm