EasyManua.ls Logo

Miele TOUCHTRONIC W 4842 - Plumbing; Drainage connection methods

Miele TOUCHTRONIC W 4842
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Drainage
The 5 ft (1.5 m) drain hose may be
connected as follows:
1. Directly into a sink: hook the hose
over the edge of the sink and secure
it firmly (e.g. by tying the hose to the
water faucet).
2. To a stand pipe: place the drain hose
intoa1½"(4cm)stand pipe and
secure it firmly.
3. To a floor drain: The machine is
equipped with an air gap /
anti-siphoning system so that no
minimum drain height is required.
^ The machine drains using a pump
with a maximum delivery height of 4 ft
(1.2 m).
^ Make sure there are no kinks in the
drain hose.
If necessary, the drain hose may be
extended to run a maximum of 16 ft
(4.9 m), as long as the 4 ft (1.2 m)
height is not exceeded. Hose
extensions are available from Miele.
Plumbing
51

Related product manuals