Need help?Do you have a question about the Miele W 526 and is the answer not in the manual?
General| Maximum spin speed | 1400 rpm |
|---|---|
| Water consumption | 52 L |
| Loading type | Front-loading |
| Programs | Delicates, Quick Wash, Rinse/Spin, Wool |
| Type | Front-loading |
| Dimensions (H x W x D) | 85 x 59.5 x 63 cm |
Information on safely disposing of packaging materials for environmental protection.
Guidance on proper disposal of old appliances to protect health and environment.
Covers correct application and safety measures for children.
Details electrical safety, installation, and repair precautions.
Provides guidance on correct operating procedures and usage.
Details on programs like Silks, Woollens, Quick wash, Automatic, Separate rinse.
Explains Water plus system, Time left display, and Future updates (PC).
Detailed guide to the control panel, buttons, and indicators.
How to select spin speeds, Rinse hold, Without spin, and other options.
Tips on optimizing energy and water usage during washing cycles.
Recommendations on the correct amount and type of detergent to use.
Explains the use of Short, Soak, and Pre-wash options for different soiling levels.
Advice on selecting spin speed for efficient tumble drying.
A quick guide from sorting to removing laundry.
Detailed program chart, care symbols, and guidance on selecting programs.
Steps for sorting, pre-treating, and correctly adding detergent.
Adding/removing items, interrupting, altering, and finishing wash programs.
Guidance on choosing and measuring detergent based on load and soiling.
Using fabric conditioners, liquid starch, and separate starch programs.
Information on color run removers, dyes, and cleaning agents.
How to clean the exterior casing and the detergent dispenser drawer.
Procedures for extra cleaning and descaling the machine.
Instructions for checking and cleaning the filters protecting the water inlet valve.
Solutions for when the machine does not start or halts unexpectedly.
Addressing fault lights during operation and unsatisfactory wash outcomes.
Troubleshooting issues with the drum door not opening or drain blockages.
Procedure for opening the door during power failure or drain blockages.
Diagrams of front/rear views, transit bar removal, and site preparation.
Steps for adjusting feet to level the machine and ensure stability.
Detailed instructions for connecting to water supply, drainage, and mains power.
Guidelines for building under worktops, stacking with dryers, and water protection.
Adjusting water intake and extra rinses for specific programs.
Programming gentler drum action and additional rinses for Cottons.
Storing custom settings and programming soak times for wash cycles.
To Next Page
