Cleaning and care
45
Damage or ineffective drying if
drying takes place without a plinth
filter or when the heat exchanger flap
is open.
Excessive accumulations of lint can
damage the dryer in the long term. If
the system is not leak-tight, this can
make the drying ineffective.
You may only operate the dryer with
the plinth filter fitted correctly and the
heat exchanger flap closed.
Cleaning the dryer
Disconnect the tumble dryer from the
electrical supply.
Damage due to the use of
unsuitable care products.
Unsuitable care products could
damage plastic surfaces and other
parts.
Do not use any solvents, abrasive
cleaners, glass cleaners, or all-
purpose cleaners.
Clean the tumble dryer and the seal
on the inside of the door with a
slightly damp soft cloth and a mild
solution of liquid dish soap and water.
Dry all the parts with a soft cloth.
To Next Page
Loading...
Need help?
General
