Programmable functions
71
Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
Programming is carried out by following
these steps (, , ... ) using the
sensors.
Accessing the programming level
Before you begin, ensure the following:
- Make sure that the programme
selector is turned to any of the
programme settings.
- The door of the dryer is open.
Touch the Start/Add laundrysensor
and hold it down whilst carrying out
steps –.
Close the tumble dryer door.
Wait until the Start/Add
laundrysensor, which will now be
flashing quickly, lights up
constantly...
...then release the Start/Add
laundrysensor.
will light up in the time display.
Choosing and selecting
programmable functions
The number of the programmable
function will appear in the display as
and a number:
e.g. .
Touch the or sensor to scroll to
the next or previous programmable
function:
Programmable function
Cottons drying levels
Minimum iron drying levels
Cooling temperature
Buzzer volume
Keypad tone
PIN Code
Conductivity
Control panel standby status
Memory
Anti-crease
Buzzer is active
Airways indicator
Backlight brightness dimmed
Confirm the selected programmable
function by touching the Start/Add
laundry sensor.
To Next Page
Loading...
Need help?
General
