H How to start a program
^
Press the flashing Start/Stopbutton.
The estimated program duration will
appear in the display as soon as the
program has started. During the first 8
minutes of the program, the washer
calculates how much water is needed,
based on the absorbency of the
laundry. This can result is shorter or
longer program times.
The program sequence will also appear
in the display. The washer will show
which program step is currently
running.
I Remove the laundry when the
program is finished
In crease-free mode, the display
alternates between:
0:00 Anti-crease
and
0:00 Finish
^
Press theDoor button to open the
drum door.
^
Remove the laundry.
Check that all items have been
removed from the drum. Items left
behind could shrink or bleed colour
during the next load.
^ Check the folds in the door seal for
foreign objects.
^ Use the I-On/0-Off button to switch
the washer off.
^ Close the door. If it is left open,
objects may inadvertently be placed
in the drum. They could be washed in
the next load and damage the
laundry.
How to wash correctly
18
To Next Page
Loading...
Need help?
General
