The washer is equipped with fully
electronic controls and load
recognition. It automatically determines
how much water is needed, based on
the size and absorbency of the load.
This means that program sequences
and times can vary.
The program sequences listed here are
based on the basic program, with a
maximum load. Extra options have not
been taken into account.
At any time during a program, you can
check the display to see which step
has been reached.
Special features in the program
sequences:
Anti-crease:
To help prevent wrinkles, the washer
drum will continue to turn at intervals for
up to 30 minutes after program
completion. Exceptions
:IntheWoolens
program, there is no anti-crease
feature.
The washer can be opened at any time.
1)
A third rinse cycle will occur if:
–
there is heavy sudsing in the drum
– the final spin speed is less than
700 RPM
– No . has been selected.
2)
A third rinse cycle will occur if:
No . has been selected.
Program sequence
25
To Next Page
