Miele W 1753 - Page 4

Detergent .......................................................28
Selecting the right detergent .........................................28
Water softener ....................................................29
Washing with several components ....................................29
Fabric softener, fabric shaper, and liquid starch .........................30
Automatic dispensing of fabric softener, fabric shaper, or liquid starch .....30
Dyes and dye removers.............................................30
Cleaning and care ................................................31
Cleaning the drum .................................................31
Cleaning the housing and control panel ................................31
Cleaning the dispenser drawer .......................................31
Cleaning the water inlet filters ........................................33
Troubleshooting..................................................34
What to do if......................................................34
No wash program will start ..........................................34
Fault messages in the display ........................................35
General problems .................................................36
Unsatisfactory wash results ..........................................37
The loading door cannot be opened with the Door button ..................38
Opening the loading door (blocked drain outlet and/or power outage) ........39
Customer service.................................................41
Repairs .......................................................41
Program updates (PC) ...........................................41
Additional accessories ...........................................41
Installation and connection ........................................42
Front view........................................................42
Rear view ........................................................43
Installation surface.................................................44
Transporting the washing machine to its installation site .................44
Removing the transit bars ...........................................44
Re-fitting the transit bars ............................................46
Contents
4