Electrical connection
The washing machine is supplied with a
mains cable with moulded plug for
connection to a 230-240V mains
supply. The voltage, rated load and
plug/fuse rating are given on the data
plate. Please ensure these match the
household mains supply.
All electrical work should be carried out
only by a suitably qualified and
competent person, in strict accordance
with national and local safety
regulations.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA.
Important
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance do not
correspond with the coloured markings
identifying the terminals of your plug,
proceed as follows:
The wire which is coloured green and
yellow must be connected to the
terminal in the plug which is marked
with the letter E or by the earth symbol
z or coloured green, or green and
yellow.
The wire which is coloured blue must
be connected to the terminal in the
plug which is marked with the letter N
or coloured black.
The wire which is coloured brown must
be connected to the terminal in the
plug which is marked with the letter A
or coloured red.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Installation and connection
52
To Next Page
Loading...
