Adding or removing laundry
after a programme has started
^
Press the Door button in until the
drum door springs open.
^
Add or remove items.
^
Close the door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
The door cannot be opened, if:
–
the suds temperature is above 55°C.
–
the water is above a certain level.
–
the programme has reached the
Final spin stage.
Changing the programme sequence
27
To Next Page
Loading...
Need help?
General
